Machine specs
https://glowforge.com/tech-specs
45 watts for Pro
Maximum material depth: 18" (455 mm) for Basic and Plus; unlimited for Pro
Maximum material width: 20″ (515 mm)
Cutting area: aprox. 11″ (279 mm) deep and 19.5″ (495 mm) wide
Maximum material height without tray: 2″ (50mm)
Maximum material height with tray: 0.5″ (13mm)
Wide Angle Camera — Mounted on the lid, provides a view of the entire printable area, accurate within 0.25" (6mm)
Macro Camera — Mounted on the head, provides extreme up-close information for autofocus, accurate within 0.004" (0.1mm)
Crumb Tray Removal
Engraving must be between .01" and .4 above crumb tray. If tray removed, figure 1.393" (use 1.4") for crumb tray height. Max thickness without crumb tray = 1.4 + .4 = 1.8"